Cleaning the scanning glass – Samsung SF-755P User Manual
Page 168
M
AINTENANCE
8.5
8
4
Reinsert the toner cartridge and close the cover.
5
Plug in the power cord and turn the machine on.
Cleaning the Scanning Glass
Keeping the scanning glass clean helps ensure the best possible
copies. We suggest that you clean the scanning glass at the start
of each day and during the day, as needed.
1
Slightly dampen a soft lint-free cloth or paper towel with water.
2
Open the control panel by gripping its top and pulling it.
3
Carefully wipe the scanning glass with a soft dry cloth.
If the glass is very dirty, first wipe it with a slightly
dampened cloth, and then with a dry cloth. Be very careful
not to scratch the glass surface.
4
Close the control panel firmly until it clicks into place.
C
AUTION
: When closing the ope control, strongly push the LCD
projection part in the center portion of ope control. If it is not fully
closed, JAM is likely to occur.