Samsung SF-755P - Manual (Page 40)

G ETTING S TARTED 1 .21
1
Installing Samsung Software
N OTES :
• Cancel the “New Hardware Found” window when your computer
boots up.
• Make sure that your machine is turned on and connected to your
computer’s parallel port or USB port before installing
software. Windows 95 and Windows NT 4.0 do not support the
USB connection.
1 Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run and an installation
window appears.
If the installation window does not appear, click Start and
then Run. Type X:\Setup.exe, replacing “X” with the
letter of your drive and click OK.
2 When the following window opens, connect your machine to
the computer and turn the machine on. Then click Next.
If the machine is already connected and turned on, this
screen does not appear. Skip to the next step.
N OTE : If you click Next and the machine is not connected to the
computer, an alert message window appears. After connecting the
machine and turning it on, click Yes. Or, if you want to install the
software without the machine, click No.