Samsung SV-DVD545 - Manual (Page 12)

ENG-23
Using the Timer Programming
Feature
The Timer Programming feature allows you to preset
the DVD-VCR to record a programme up to one month
before that programme is to be broadcast. Up to six
programmes can be preset.
☛
Before presetting a recording, check that the
date and time are correct.
1 Insert the cassette and press TIMER on the remote
control.
Result: The timer selection is displayed.
2 Press the OK button to select Standard option.
Result: The TIMER PROGRAMMING menu is
displayed.
3 Press ❿ to select the input source.
4 Select the required station by pressing the , ❷
buttons or INPUT SEL. to select the AV1, AV2 or
AUX(SV-DVD440/SV-DVD540 Only) input sources.
5 Press ❿ to select the recording day.
6 Select the required day by pressing the , ❷
buttons.
7 Press ❿ to select the recording start time.
8 Select the required hour value by pressing the
, ❷ buttons.
9 Press ❿ to select the minutes.
10 Select the required minute value by pressing the
, ❷ buttons.
11 Press ❿ to select the recording stop time.
You can check your preset recordings:
◆ When you have finished presetting the DVD-VCR
◆ If you have forgotten which programmes will be
recorded
1 Press TIMER on the remote control.
Result: The timer selection is displayed.
2 Press the OK button to select Standard option.
Result: The TIMER PROGRAMMING menu is
displayed.
3 Press the , ❷ buttons to select the required
programme.
4 Press the ➛ or ❿ buttons to select and change any
values as required. For more details, refer to the
previous page.
5 On completion, press RETURN twice.
Standard
VideoPlus
Timer Method
PR Day Start Stop Speed V/P
WE 1 19 : 00 19 : 30 SP Off
: :
: :
: :
: :
: :
12 Select the required recording stop time by pressing
the
, ❷ buttons, following the same procedure as
when selecting the recording start time.
13 Press ❿ to select the recording speed.
14 Press the , ❷ buttons to select the SP (Standard
Play), LP (Long Play), Auto (Auto Tape speed
Select) recording speeds.
15 Press the , ❷ buttons to toggle between the PDC
mode (marked On) and the non PDC mode (marked
Off).
16 When you have finished, press the RETURN button.
17 Press the STANDBY/ON button to activate the timer.
Result: Before starting recording, the DVD-VCR
compares the timer duration with the
remaining time on the cassette.
➢
Auto Tape Speed select. The DVD-VCR’s “Auto
Tape Speed select” function compares the
duration of the timer recording to the actual
recording time remaining on the tape loaded.
If there is insufficient tape to complete a timer
recording in AUTO mode, the DVD-VCR
automatically switches to LP mode to record the
whole programme.
Checking a Preset Recording
ENG-22
Modifying VideoPlus Programming
★
(SV-DVD540/SV-DVD545Only)
If you wish to correct the programme displayed or modify certain elements, such as the recording
speed, you can do so before you press RETURN a second time to confirm.
If you wish to... Then...
Select an input source other ◆ Press the ➛ or ❿ buttons, until the PR selection mode.
than the tuner (AV1, AV2 or AUX) ◆ Press the INPUT SEL. button one or more times to change the
input source selection.
Result:
The programme number is replaced by:
• The AV1, AV2 or AUX(SV-DVD540 Only) source
using the INPUT SEL.
button for a satellite tuner or external video source
➢
The input source must be selected before changing any other
value.
Record a programme every day ◆ Press the ➛ or ❿ buttons, until the DAY selection mode.
(Monday to Sunday) at the same time ◆ Press the or ❷ buttons, until the DLY (Daily) value is
displayed.
Record a programme every week ◆ Press the ➛ or ❿ buttons, until the DAY selection mode.
on the same day and at the same time ◆ Press the or ❷ buttons, until the W- (Week) value is
displayed, followed by the required day.
Example: W-SA (Weekly Saturday)
Extend the recording time ◆ Press the ➛ or ❿ buttons, until the STOP selection mode.
◆ Press the or ❷ buttons to increase or decrease the stop
time.
Select the recording speed ◆ Press the ➛ or ❿ buttons, until the recording speed selection
mode.
◆ Press the or ❷ buttons until the correct indication is
displayed:
• AUTO (Auto Tape Speed Select)
• SP (Standard Play)
• LP (Long Play)
Select the PDC recording ◆ Press the ➛ or ❿ buttons, until the PDC off mode.
◆ Press the or ❷ buttons until the “On” indication is displayed.
☛ Do not select PDC unless you are sure the programme you
wish to record is broadcast with PDC. If you do set PDC On
(by selecting “On” in the right - hand column on the screen),
then you must set up the start-time EXACTLY according to
the published TV schedule. Otherwise the timer recording
won’t take place.
(SV-DVD540/SV-DVD545)
00374C SV-DVD440/XEU 1/30/04 5:07 PM Page 22