Samsung SV-DVD545 User Manual

Page 13

Advertising
background image

ENG-25

ENG-24

Playing a Cassette in
Slow Motion

Playing a Sequence at
Variable Speeds

You can play a cassette in slow motion.

No sound is heard when playing back a

cassette in slow motion.

1

Press:

ll

to start playing the cassette

ll

button one more time to make still mode.

❿❿ to start SLOW mode.

➛➛ or ❿❿ button as many times as required to
decrease or increase the speed respectively

To return to the normal speed, press the ❿

ll

button

twice.

2

When playing back in slow motion, picture
interference may occur.
Press the TRK buttons to minimize this effect.

When you have been using the Slow Motion

function for more than about two minutes, the
DVD-VCR will automatically play to protect the:

Cassette

Video heads

You can vary the playback speed using the Shuttle
function (up to nine times the normal speed).

Example:

You wish to analyse a sportsperson’s
technique, movement by movement.

The Shuttle function is available on the Remote control

No sound is heard when playing a sequence at

variable speeds.

1

Press:

ll

during playback

SHUTTLE (<<) to play the cassette backwards

SHUTTLE (>>) to play the cassette forwards

2

Each time you press a SHUTTLE button, the speed
is changed as shown in the following illustration.

Playing a Sequence Frame
by Frame

You can

Stop the cassette at a given frame (image)

Advance one frame at a time

No sound is heard when playing back frame by

frame.

1

Press:

ll

to start playing the cassette

ll

button one more time to make still mode.

F.ADV/STEP to advance frame by frame

2

To return to normal playback, press ❿

ll

.

Vertical stability: When playing back frame by

frame, interference may be seen on the screen.
Press the TRK buttons to minimize this effect.

REVERSE REVERSE REVERSE

SLOW

SLOW

PLAY PLAY PLAY

PLAY

PLAY

PLAY

STILL

MOTION

MOTION PLAY

X3

X5

X9

X9

X5

X3

X1/10

X1/5

Playing a Cassette

Cancelling a Preset Recording

You can cancel any programmes that are:

Incorrect

No longer required

1

Press TIMER on the remote control.
Result: The timer selection is displayed.

2

Press the OK button to select Standard option.
Result: The TIMER PROGRAMMING menu is

displayed.

3

Select the programme to be cancelled by pressing
the

,

buttons.

4

Press the CLEAR button to cancel the selected
programme.
Result: All the recording information is deleted and

the broadcast will not be recorded.

5

On completion, press RETURN twice.

Selecting the Audio
Output Mode

You can select the mode in which the sound is
reproduced on the loudspeakers and AV outputs. The
following options are available.

Option

Description

L

Used to listen to the sound on the left Hi-Fi
channel.

R

Used to listen to the sound on the right
Hi-Fi channel.

MIX

Used to listen to the mixed sound of the
Hi-Fi and normal channels.

MONO

Used to listen to the sound on the normal
mono channel.

L R

Used to listen to Hi-Fi stereo sound on the
left and right channels.

When playing back tapes recorded in
Hi-Fi, the sound switches to Hi-Fi after

five seconds of Mono.

To select the sound mode, simply press the AUDIO
button on the remote control until the required option is
displayed.

Adjusting Picture Alignment
Manually

The Picture Adjustment feature allows you to adjust the
alignment manually to obtain the best possible picture.

When noise bars or streaks appear during playback,
adjust alignment manually by pressing the TRK buttons
until the picture is clear and stable.

Result:

The tracking bar appears.

The image is adjusted.

The tracking bar disappears when you

release the button.

This function allows you to play back any pre-recorded
cassette.

1

Switch on both the television and your DVD-VCR.

2

Insert the video cassette to be played. If the safety
tab on the cassette is intact, press ❿

ll

.

Otherwise, the cassette is played automatically.

When a cassette is loaded, the tape position is

optimized automatically to reduce disturbance
(Digital Auto Tracking).
When playing a cassette, if the end of the
tape is reached, the cassette is rewound
automatically.
NTSC tapes can be played back but cannot

be recorded with this DVD-VCR.

3

To...

Then press...

Stop the playback

■ (STOP).

Eject the cassette

(EJECT).

L

R MIX

L R MONO

00374C SV-DVD440/XEU 1/30/04 5:07 PM Page 24

Advertising
This manual is related to the following products: