Siemens Simantic Net NCM for Industrial Ethernet S7 - Manual (Page 61)

Installing and Starting the Ethernet CP with STEP 7
61
SIMATIC NET NCM S7 for Industrial Ethernet
C79000-G8976-C129–06
Procedure
To enter a substitute object in the project, following the steps below:
1. Select the project in the SIMATIC Manager.
2. Select the menu command Insert " Station " and then as necessary
Other Station, PG/PC or SIMATIC S5.
Possible result: the selected object is created in the project.
Figure 2-6 Project With Substitute Objects Configured
Attaching Non-S7 Stations to the Subnet
The next step is to assign the substitute objects to the subnet, as follows:
1. Select the required object in the project and select Edit " Object Properties.
2. In the Properties dialog box that is displayed select the ”Interfaces” tab and
click the “New” button (for example “Other Station”.
Result: The New Interface – Type Selection dialog box is displayed.