Samsung HW-C500 - Manual (Page 27)

27
ENG
●
BASIC FUNCTIONS OF YOUR AV RECEIVER
BEFORE USING THE AV RECEIVER
Turning On/Off
Connect the power plug to the outlet.
Press the POWER button on the main unit for 2 seconds.
This unit will be turned on or set to Standby mode.
You can also turn the unit on/off by pressing the POWER button on the remote control.
Remote control functions
You can operate your AMP (this AV receiver)/ TV and BD(Samsung only)/ DVD player with this remote control.
See pages 49 ~ 51 for more details.
To select a function
Method 1
Press the INPUT SELECT button.
Each time you press this button, FM ➝ BD/DVD ➝ SAT ➝ TV ➝ CD ➝ AUX ➝ 5.1 MULTI CH ➝
IPOD AUDIO
➝ IPOD VIDEO will be selected in turn.
Method 2
Press the TUNING/CH, BD/DVD, SAT, TV, CD, MULTI CH, AUX or iPod button.
You can directly select the desired function.
•
•
•
•
AUDIO SETUP
Selecting a source device and connection jack
Select the external devices you have connected to the receiver.
Press the SETUP/MENU button.
Each time the button is pressed, the mode switches
between SETUP ENTER and SETUP OFF.
Press the ENTER button to select SETUP ENTER.
Press the ▲▼ buttons to select AUDIO SETUP, and then press
the ENTER or ► button.
Press the ▲▼ buttons to select a desired jack.
The source device switches as follows; BD/DVD, SAT, TV,
CD
- To exit setup mode -
Press the SETUP/MENU button.
SETUP OFF appears on the display and Setup Mode is exited.
You can also use SETUP, ,,.,
<
,
>
, ENTER on the front of your AV Receiver.
1.
•
2.
3.
4.
•
•
M

Æ
Basic functions of your AV Receiver
HW-C500-C560S-XAC_0616.indd 27 HW-C500-C560S-XAC_0616.indd 27 2010-06-16 2:08:21 2010-06-16 2:08:21