Samsung HW-C500 - Manual (Page 48)

48
Operation
Reset function
When the Power is on,
Press the MUTE button.
MUTE appears on the display.
Press the 9 button fi ve times and then press the ENTER button.
INITIAL : NO appears on the display.
Press the ▲▼ buttons to select YES.
The unit will turn off after 5 seconds.
When the Power is Off,
Press and hold the MEMORY button on the front of your AV Receiver for longer than 5 seconds.
POWER LED will blink one time.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
SOFTWARE UPGRADE
Samsung may offer upgrades for AV Receiver's fi rmware in the future.
Please visit Samsung.com or contact the Samsung call centre to receive
information about downloading upgrades and using a USB drive.
Upgrades will be possible by connecting a USB drive to the USB port
located on your AV Receiver.
Insert a USB drive containing the fi rmware upgrade into the USB port
on the back of the main unit.
Please be careful to not disconnect the power or remove the USB
drive while upgrades are being applied. The main unit will turn off
automatically after completing the fi rmware upgrade.
When software is upgraded, settings you have made will return to
their default (factory) settings. We recommend you write down your
settings so that you can easily reset them after the upgrade.
If you failed software upgrade, it is strongly recommended whole USB data
format to FAT16 and retry software upgrade.
The NTFS USB File System can not be supported.
Depending on the manufacturer, the USB may not be supported.
1.
•
2.
•
3.
•
1.
•
M


M





SLEEP
PROLOGIC AUDIO ASSIGN DSP
7 8
0
9
SLEEP
PROLOGIC AUDIO ASSIGN DSP
7 8
0
TUNER MEMORY SUBWOOFER MO/ST
MUTE
ASC
VOL
TUNING
/CH
SETUP/MENU
RETURN EXIT
INFO
POPUP
TUNER MEMORY SUBWOOFER MO/ST
ASC
VOL
TUNING
/CH
SETUP/MENU
RETURN EXIT
INFO
POPUP
HW-C500-C560S-XAC_0616.indd 48 HW-C500-C560S-XAC_0616.indd 48 2010-06-16 2:08:31 2010-06-16 2:08:31