Samsung SPD-3700T - Manual (Page 5)

8 SPEED DOME CAMERA ACCESSORIES 9 SPEED DOME CAMERA ACCESSORIES
■ 3. Pendant Type Installation
■ 3.1 Wall Mount Type Installation
STH-380PO
STH-370PO
STH-360PO
STH-370PI
STH-270PWV
Fan Heater Adaptor
(STH-380PO Only)
Camera Adaptor
STH-380PO/370PO/370PI/360PO STH-380PO/370PO/370PI/360PO
1. Securing Wall Bracket and Wiring
As shown in the picture, secure the wall bracket to the wall, and then pull the wires out
of the bracket. Please note that the STH-380PO housing requires an additional
installation of the fan heater adapter enclosed with the product.
2. Preparing Housing
Open the hinged door at the bottom of the housing.
Hold the knob on the hinged door to open.
3. Connecting Housing and Bracket
To prevent the housing from falling down during the installation process, hook the safety
cable on the bracket loop as shown in the picture.
•Donotconnectthecameratoapoweroutletuntiltheinstallationiscomplete.Supplying
power in the middle of the installation may cause fire or damage the product.
•STH-370POrequiresanadditionalinstallationofthefanheateradapterenclosedwiththe
product. Connecting the fan heater to a power outlet used for the camera can cause fire or
accidents.
Notes
Pendant Type Installation Pendant Type Installation
Knob
✽ To store the adaptor, the STB-270B Setup Box (Page 31) can be used.