Sharp AHT-E300 - Manual (Page 21)

17
AHT-E300 ADSL ROUTER
6. Click Configuration - [LAN] link. Then the LAN Configuration page will
appear. In this page, you can configure LAN settings.
LAN configuration
IP Address IP address of the modem
Subnet Mask Subnet mask of the modem
DHCP Server
DHCP address pool
selection Select User Defined if you want to allocate the IP
addresses that will be assigned to the PCs.
User Defined Start Address Start address of IP address pool
User Defined End Address
End address of IP address pool
Lease Time Select 0 if you want to auto-management
User Mode Only single user mode is working in this version
Ethernet Mode Select Autosense if you want to auto-sensing.