Samsung VP-D190MSI - Manual (Page 39)

ENGLISH
39
Advanced Recording
● DEMONSTRATION
✤ Demonstration automatically shows you the major functions that are included with
your camcorder so that you may use them more easily.
✤ The DEMONSTRATION function may only be used in the CAM mode without a tape
inserted in the camcorder.
✤ The demonstration operates repeatedly until the DEMONSTRATION mode switched
OFF.
1. Set the camcorder to CAM mode.
2. Press the MENU button.
■ The menu list will appear.
3. Turn the MENU DIAL to highlight INITIAL.
4. Select DEMONSTRATION from the submenu and push the MENU DIAL.
5. To activate the DEMONSTRATION, set DEMONSTRATION ON.
■ Press the menu button to quit the menu.
■ The demonstration will begin.
6. To end the DEMONSTRATION, set the DEMONSTRATION to OFF.
Notes
■ The DEMONSTRATION function only works without a TAPE installed.
■ The DEMONSTRATION mode is automatically activated when the camcorder is left idle
for more than 10 minutes after switching to the CAM mode (when the tape is not inserted
in the camcorder).
■ If you press other buttons (FADE, BLC, PHOTO, EASY, CUSTOM) during the
DEMONSTRATION mode, the DEMONSTRATION stops temporarily and resumes
10 minutes later if you do not operate any other functions.
CAM MODE
INITIAL CLOCK SET
REMOCON
BEEP SOUND
SHUT SOUND
DEMO
CAMERA
A/V
MEMORY
VIEWER
CAM MODE
INITIAL SET
CLOCK SET
REMOCON
BEEP SOUND
SHUTTER SOUND
DEMONSTRATION