Samsung VP-D190MSI - Manual (Page 52)

ENGLISH
Advanced Recording
52
● DATE/TIME
✤ The DATE/TIME function works in CAM, VCR, M.REC and M.PLAY modes.
✤ The date and time are automatically recorded on a special data area of the tape.
1. Press the MENU button.
■ The menu list will appear.
2. Turn the MENU DIAL to highlight VIEWER and push the MENU DIAL.
3. Turn the MENU DIAL to highlight DATE/TIME.
4. Push the MENU DIAL to select the sub-menu.
5. Using the MENU DIAL, select the DATE/TIME mode.
✤ You can choose between - the OFF, DATE, TIME and DATE/TIME modes
■ OFF only
■ DATE only
■ TIME only
■ DATE & TIME
✤ To return to the previous menu, highlight DATE/TIME in the middle of the menu
and push MENU DIAL.
6. To exit, press the MENU button.
Notes
■ The DATE/TIME is not affected by the OSD ON/OFF (DISPLAY) button.
■ The DATE/TIME will read “- - -” in the following conditions.
-
During playback of a blank section of a tape.
- If the tape was recorded before setting the DATE/TIME in the Camera’s memory.
- When the battery becomes weak or dead.
■ Before you can use the DATE/TIME function, you must set the Clock.
CAM MODE
VIEWER SET
LCD ADJUST
DATE / TIME
TV DISPLAY
CAM MODE
INITIAL
LCD ADJUST
DATE / TIME
TV DISPLAY
CAMERA
A/V
MEMORY
VIEWER
CAM MODE
DATE / TIME
VIEWER SET
DATE
TIME
DATE&TIME