Samsung BN68-01983A-00 - Manual (Page 10)

English - 
Placing Your Television in Standby Mode
Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you
wish to interrupt viewing temporarily (during a meal, for example).
. Press the POWERP button on the remote control.
The screen is turned off and a red standby indicator appears on your set.
. To switch your set back on, simply press the POWERP button again.
Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is best to
unplug the set from the mains and aerial.
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently.
. Press the POWERP button on the remote control.
You can also use the POWERP button on the TV.
. Press the ▲ or ▼ button to select the language, then press the ENTERE button.
. Press the ◄ or ► button to select Store Demo or Home Use, then the ENTERE button.
We recommend setting the TV to Home Use mode for the best picture in your home environment.
Store Demo mode is only intended for use in retail environments.
If the unit is accidentally set to Store Demo mode and you want to return to Home Use (Standard): Press the volume
button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.
. The message Check antenna input. is displayed with OK selected.
Press the ENTERE button.
Please check that the antenna cable is connected correctly.
. Select the appropriate area by pressing the▲ or ▼ button.
Press the ENTERE button to confirm your choice.
. The Auto Store menu is displayed with the Start selected. Press the ENTERE button.
The channel search will start and end automatically.
Press the ENTERE button at any time to interrupt the memorization process.
After all the available channels are stored, the Clock Set menu appears.
. Press the ENTERE button.
Select the Month, Day, Year, Hour, Minute, or am/pm by pressing the ◄ or ► button.
Set the Month, Day, Year, Hour, Minute, or am/pm by pressing the ▲ or ▼ button.
You can also set the Month, Day, Year, Hour and Minute by pressing the number buttons on the remote control.
. Press the ENTERE button to confirm your setting. The message Enjoy your TV. is displayed.
When you have finished, press the ENTERE button.
Even if the ENTERE button is not pressed, the message will automatically disappear after several seconds.
If you want to reset this feature...
. Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup,
then press the ENTERE button.
. Press the ENTERE button again to select Plug & Play.
The Plug & Play feature is only available in the TV mode.
¦
N
N
¦
N
N
N
N
N
N
N
N
N
N
N
I-II
Plug & Play 
Language : English 
Time 
Child Lock : On 
Change PIN
Game Mode : Off 
Melody : Off 
Energy Saving : Off 
PIP 
U Move E Enter R Return
TV Setup
[530]BN68-01983A-00Eng.indb 8 2009-03-17 �� 5:36:23