Samsung BN68-01983A-00 - Manual (Page 25)

English - 
TV Remote Control Buttons Available in Anynet+ Mode
Device Type Operating Status Available Buttons
Anynet+ Device
After switching to the device, when the
menu of the corresponding device is
displayed on the screen.
Numeric buttons
▲/▼/◄/►/wheel/ ENTERE buttons
Colour buttons / EXIT button
After switching to the device, while playing
a file
π(Backward search) / μ(Forward search) /
∫(Stop) / ∂(Play) / ∑(Pause)
Device with built-in
Tuner
After switching to the device, when you
are watching a TV program
P > / P < button
Audio Device When Receiver is activated Volume / MUTE button
The Anynet+ function only works when the active source on the TV remote control is set to TV.
The ∏ button works only while in the recordable state.
You cannot control Anynet+ devices using the buttons on the TV. You can control Anynet+ devices only using the TV remote
control.
The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device.
The Anynet+ functions do not operate with other manufacturers’ products.
The π, μ operations may differ depending on the device.
Recording
You can make a recording of a TV programme using a recorder.
Press the ∏ button.
Recording begins. (Only when the Anynet+ enabled recording device is connected.)
The current TV programme is recorded in the Watching TV status. If you are watching video from another device, the video
from the device is recorded.
You can also record the source streams by selecting Record after pressing the TOOLS button.
Before recording, check whether the antenna jack is properly connected to the recording device.
For the antenna connection to the recording device, refer to its user manual.
N
N
N
N
N
N
¦
N
N
N
N
[530]BN68-01983A-00Eng.indb 23 2009-03-17 �� 5:36:27