Sima Products XL-8 - Manual (Page 12)

Page 12
7. Feed the cord from A2 through
the back of the screen through
the S2 grommet. (Fig. 25)
8. Now feed the cord back into
the front of the A2 grommet .
(Fig. 26)
9. Continue working around the
screen until you have laced all
of the grommets. (Fig. 27)
Upon completely attaching the
screen, Re-connect the pump
and fill the screen 100% with air.
This will pull the screen tight and
insure the best possible
projection surface.
Fig. 25 Fig. 26
Fig. 27