Sima Products XL-8 - Manual (Page 19)

Page 20
10. Insert the frame into your Nylon storage
bag. (Fig.37)
11. Then for safe storage insert the Nylon
storage bag containing the frame in the
shipping box. (Fig.38)
Store in a cool dry place.
Repair Kit
In case the frame gets a hole or tear while in use Sima included a patch kit.
Finding a leak
To find any leak apply soapy water to all the seams around the screen. Once hole is located be sure to clean off the
surface.
Repairing a leak
The glue will not stick to a soapy surface. Rinse with plenty of water and dry prior to applying glue. Make sure the screen
is deflated prior to procedure.
1. Using patch kit cut a piece of material about 1 inch larger than the size of the tear.
2. Apply glue to both the patch and the screen itself.
3. Let the glue set for 1 to 3 minutes prior to pressing them together.
4. The glue is a contact adhesive and must get tacky prior to sticking together.
5. Carefully apply the patch to the screen and hold for a few minutes
6. Pressure must be applied to patch for 2 to 3 hours until glue dries.
7. It is best to wait 4 to 8 hours before inflating the screen
WARNING: PLEASE WEAR PROTECTIVE LATEX GLOVES WHEN USING THE REPAIR KIT. KEEP GLUE AWAY
FROM EYES & MOUTH. DO NOT INHALE THE GLUE AND WASH HANDS THOROUGHLY AFTER USING
SUBSTANCE.
Fig. 37 Fig. 38