Sima Products XL-8 - Manual (Page 11)

Page 11
Lacing Up the Screen
As an alternative to the Velcro
Strip attachment method, the
screen can be attached with Nylon
Lacing.
1. Insert the lacing cord through
the back of the top left
grommet (A1) on the frame.
(Fig. 19)
2. Tie the cord using a secure
knot. (Fig. 20)
3. Feed the cord from the back
of the frame through the
upper left grommet on the
screen (S1) (Fig. 21)
4. Insert the end of the cord
from S1 into the front of the
grommet on the frame (A1)
(Fig. 22)
5. Pull the cord through A1.
Make sure the cord stays flat
and is not twisted. (Fig. 23)
6. Feed the cord through the
back of the A2 grommet on
the frame. (Fig. 24)
Fig. 20
Fig. 19
Fig. 21 Fig. 22
Fig. 23 Fig. 24