Sima Products XL-8 - Manual (Page 16)

Hooking up the Speakers to the Volume Control Box
It is suggested that you place the two speakers on the ground cloth next to the base of the frame.
The Volume Control Box should sit next to the DVD player. It lets you adjust the audio volume level
without having to walk up to each speaker.
To connect the speakers for use with your projector and DVD player use the RCA cables provided. Follow the steps and
diagram below.
1. Connect the L + R audio output of your DVD player to the L + R input on the Volume Control Box.
2. Connect the Video output of your DVD player to the Video input of your projector.
3. Connect the L Audio output of the Volume Control Box to the L Line input of the XL-SP speaker you have located
to the left of the screen and frame.
4. Connect the R output of the Volume Control Box to the R Line input of the other XL-SP speaker you have located
to the left of the screen and frame.
5. Plug the AC line cords into the AC Power Inlet on the back of each speaker and insert the other ends into a
properly grounded GFI outlet.
6. Set the volume level on the Volume control box to min.
7. Set the Line Input level, Bass and Treble controls on the back of each speaker to the middle (12:00 o’clock) position.
8. Turn on the Power switch on the back of each speaker. The light in the switch will light indicating AC power is on.
9. Place a DVD or CD into the DVD player and start the movie or audio.
10. Adjust the Volume Control Box for a good audio level. If you hear no sound, be sure the DVD is playing. Check
all cable connections. If the sound is not loud enough with the Volume Control Box set to maximum, turn the Line
Input Level control on the back of each speaker up. Also, be sure any volume setting in the DVD player or
projector is set properly.
Page 16
XL-SP8 Speaker