Sima Products XL-8 - Manual (Page 5)

Page 5
List of Materials:
Your package should include the following materials:
XL-8
8’ Inflatable Frame
8’ White PVC Screen
8’ Black Light Guard
2 8” 80 Watt Speaker (XL-SP-8)
1 Air pump w/attachments (inflator / deflator) Part # 52387
1 Repair Kit (Four 6”square reinforced patches & 4 Tubes of Glue)
1 Nylon Storage Bag
1 Clear Plastic Ground Sheet 63"x115"x0.1mm
1 Stereo RCA Cables (30’)
4 White Nylon Ropes (20')
4 Ground Stakes
52 Velcro Quick Ties
1 Black Laced Screen Tie
1 Volume Control Box
XL-12
12’ Inflatable Frame
12’ White Vinyl Screen
12’ Black Light Guard
2 8” 80 Watt Speakers
1 Air pump w/attachments (inflator / deflator) Part # 52388
1 Repair Kit (Four 6”square reinforced patches & 4 Tubes of Glue)
1 Nylon Storage Bag
1 Clear Plastic Ground Sheet 63"x160"x0.1mm
1 Stereo RCA Cables (30’)
4 White Nylon Ropes
4 Ground Stakes
70 Velcro Quick Ties
1 Black Laced Screen Tie
1 Volume Control Box
Selecting A Setup Site
Select a site that has the necessary height clearance for the
screen and enough room for your projector to properly focus and
size the projected image. The screen will stand nearly 11 feet in
height. Allow approximately 15 to 20 feet in front (or behind for
rear-projection) of the screen to adjust the projector. (Fig. 1)
Be sure there are no sharp objects lying on the surface such as
rocks, roots, sticks, broken glass or pieces of metal that might
puncture or tear the screen.
Check to be sure that an 110V/120V AC wall outlet is in reach to
plug in the air pump. Use a properly grounded GFI outlet if using
the product outdoors.
Unpack the screen at the location in which it will be inflated.
Once a site has been selected and prepared, lay out the clear
plastic ground cloth in the location that the screen bases will sit
on when inflated as shown at right.
Fig.1