Sima Products XL-8 - Manual (Page 9)

Page 9
Screen Installation with Velcro Strips
You can attach the screen to the frame using either the Velcro strips or cloth lace. The cloth lace
typically gives a more professional look while the Velcro strips allow you to attach and remove the
screen more quickly.
Please use the following steps to attach the screen successfully using the Velcro strips.
1. Attach the Velcro strips to all the grommets
on the frame as shown in figure15.
2. Unroll the white vinyl screen from the
supplied tube in the package.
3. Begin to lace each Velcro strip to secure the
screen to the frame by looping the Velcro
through the back of the grommet in the
screen, and passing the Velcro strip through
the hole in the top of the strip. (Fig. 16)
4. Leave a couple of inches of slack as you
attach each Velcro strip the first time
around. This will allow you to more easily
adjust the screen later once fully attached.
Fig. 15
Fig. 16