Suzuki Grand Vitara 99011-66J22-03E User Manual

Page 47

Advertising
background image

2-34

BEFORE DRIVING

66J22-03E

54G184

4) Push the child restraint toward the

anchors so that the connecting bar tips
are partially hooked to the anchors.
Use your hands to confirm the position.

54G185

5) Grasp the front of the child restraint and

push the child restraint forcefully to
latch the connecting bars. Make sure
they are securely latched by trying to
move the child restraint system in all
directions, especially forward.

6) Return the seatback if folded. Attach

the top tether strap, if applicable.

Installation-Child Restraint with Top
Strap

Rear seat

64J029

Some child restraint systems require the
use of a top strap. Top strap anchor brack-
ets are located on the back of the rear seat
as shown in the illustration. Install the child
restraint system as follows:
1) Remove the luggage compartment

cover.

2) Secure the child restraint on the rear

seat using the procedure described
above for securing a restraint system
that does not require a top strap.

3) Hook the top strap to the anchor

bracket and tighten the top strap
according to the instructions provided
by the child restraint system manufac-
turer. Be sure to attach the top strap to
the corresponding anchor located
directly behind the child restraint. Do

EXAMPLE

WARNING

The seatback should always be
securely latched in a fairly upright
position when any type of child seat
is installed. An unlatched or reclined
seatback will reduce the intended
effectiveness of the child restraint
system.

EXAMPLE

EXAMPLE

Seat Belts and Child Restraint Systems: 14

Advertising