Rear window wiper/washer switch -9 – Suzuki Grand Vitara 99011-66J22-03E User Manual

Page 70

Advertising
background image

3-9

STEERING COLUMN CONTROLS

66J22-03E

Rear Window Wiper/Washer
Switch

63J286

To turn the rear wiper on, twist the rear
wiper switch on the end of the lever for-
ward to the “ON” position. If your vehicle is
equipped the “INT” position, the rear wiper
operates intermittently when you twist the
switch forward to the “INT” position. To turn
the rear wiper off, twist the switch rearward
to the “OFF” position.

With the rear wiper in the “OFF” position,
twist the switch rearward and hold it there
to spray window washer fluid.

With the rear wiper in the “ON” position,
turn the switch forward and hold it there to
spray window washer fluid.

CAUTION

To help prevent damage to wind-
shield wiper and washer system
components, you should take the fol-
lowing precautions:
• Do not continue to hold in the lever

when there is no windshield
washer fluid being sprayed or the
washer motor can be damaged.

• Do not attempt to remove dirt from

a dry windshield with the wipers or
you can damage the windshield
and the wiper blades. Always wet
the windshield with washer fluid
before operating the wipers.

• Clear ice or packed snow from the

wiper blades before using the wip-
ers.

• Check the washer fluid level regu-

larly. Check it often when the
weather is bad.

• Only fill the washer fluid reservoir

3/4 full during cold weather to allow
room for expansion if the tempera-
ture falls low enough to freeze the
solution.

EXAMPLE

Wiper

Intermittent wiper

Washer

CAUTION

Clear ice or snow from the rear win-
dow and rear wiper blade before
using the rear wiper. Accumulated ice
or snow could prevent the wiper
blade from moving, causing damage
to the wiper motor.

Windshield Wiper and Washer Lever: 8
Rear Window Wiper/Washer Switch: 8

Advertising