SMC Networks SMC7904WBRA - Manual (Page 32)

C
ONFIGURING
C
LIENT
PC
3-6
Obtain IP Settings from Your Barricade
Now that you have configured your computer to
connect to your Barricade, it needs to obtain new
network settings. By releasing old DHCP IP settings
and renewing them with settings from your Barricade,
you can also verify that you have configured your
computer correctly.
1. On the Windows desktop, click Start/Run...
2. Type “WINIPCFG” and click OK.
It may take a second or two for the
IP Configuration window to
appear.
3. In the IP Configuration window,
select your network card from the
drop-down menu. Click Release
and then click Renew. Verify that
your IP address is now
192.168.2.xxx, your Subnet Mask
is 255.255.255.0 and your Default
Gateway is 192.168.2.1. These
values confirm that your Barricade is functioning. Click OK to close
the IP Configuration window.