SMC Networks SMC7904WBRA - Manual (Page 63)

A
DVANCED
S
ETUP
4-19
Password Settings
Use this page to change the password for accessing the management
interface of the Barricade.
Passwords can contain from 3~12 alphanumeric characters and are case
sensitive.
Note: If you lost the password, or you cannot gain access to the user
interface, press the blue reset button on the rear panel, holding it
down for at least five seconds to restore the factory defaults. The
default password is “smcadmin”.
Enter a maximum Idle Time Out (in minutes) to define a maximum period
of time for which the login session is maintained during inactivity. If the
connection is inactive for longer than the maximum idle time, it will
perform system logout, and you have to log in again to access the
management interface. (Default: 10 minutes) Click “SAVE SETTINGS”
to save the new setting.