Sony STR-DA3200ES - Manual (Page 112)

112 GB
Clearing all the contents
of the remote’s memory
1
Press and hold MASTER VOL –
first, then press ?/1 and then
AV ?/1.
The RM SET UP button flashes three
times.
2
Release MASTER VOL –.
All the contents of the remote’s memory
(i.e., all the programmed data) are
cleared.
Changing button
assignments
(RM-AAU008
only)
You can change the factory settings of the
input buttons to suit the components in your
system. For example, if you connect a DVD
player to the VIDEO 2 IN jacks on the
receiver, you can set the VIDEO 2 button on
this remote to control the DVD player.
Note, however, that the settings of the TUNER
button cannot be changed.
1
Press RM SET UP for more than
2 seconds.
The indicator lights up.
2
Press the input button of which
you want to change the
assignment.
The indicator turns off once and turns on
again when a valid button is pressed. Only
the first input button that is pressed will
be registered.
Example: Press VIDEO 2.
1
1,2
1
2,3
4