Specifications, Remote control, Error message – Sony STR-DA3200ES User Manual

Page 121

Advertising
background image

121

GB

Ad
diti

onal

Inf

o

rma

tion

Remote control

The remote does not function.

• Point the remote at the remote sensor on

the receiver.

• Remove any obstacles in the path between

the remote and the receiver.

• Replace all the batteries in the remote with

new ones, if they are weak.

• Make sure that the command modes of the

receiver and the remote are the same. If the
command mode of the receiver and the
remote are different, you cannot operate
the receiver with the remote (page 40).

• Make sure you select the correct input on

the remote.

• When you operate a programmed non-

Sony component, the remote may not
function properly depending on the model
and the maker of the component.

Error message

If there is a malfunction, the display shows
a code of two numbers and a message. You
can check the condition of the system by the
message. Refer to the following table to
solve the problem. If any problem persists,
consult your nearest Sony dealer.

PROTECTOR

Irregular current is being output from the
speakers, or the upper panel of the receiver
is covered with something. The receiver will
automatically turn off after a few seconds.
Check the speaker connection and turn on
the power again.

Reference sections for clearing
the memory

Specifications

Amplifier section

POWER OUTPUT
Rated Power Output at Stereo Mode

1) 2)

(8 ohms 1 kHz, THD
0.7%):
125 W + 125 W

Reference Power Output at Stereo Mode

2)

(4 ohms 1 kHz, THD
0.7%):
125 W + 125 W

Reference Power Output

(8 ohms 20 Hz – 20 kHz,
THD 0.09%)
FRONT

2)

:

120 W + 120 W
CENTER

2)

:

120 W
SURROUND

2)

:

120 W + 120 W
SURROUND BACK

2)

:

120 W + 120 W

Reference Power Output

(4 ohms 20 Hz – 20 kHz,
THD 0.15%)
FRONT

2)

:

120 W + 120 W
CENTER

2)

:

120 W
SURROUND

2)

:

120 W + 120 W
SURROUND BACK

2)

:

120 W + 120 W

Reference Power Output at Stereo Mode

(8 ohms 1 kHz, THD
10%):
150 W + 150 W

Reference Power Output at Stereo Mode

(4 ohms 1 kHz, THD
10%):
150 W + 150 W

To clear

See

All memorized settings

page 39

Customized sound fields

page 81

continued

Advertising