Siemens NO NAME HE2425 - Manual (Page 40)

Cleaning and Maintenance
English 38
5. REMOVE RACKS appears in the display
as a reminder to remove oven racks.
6. Press START again to begin the self-
clean.
Note: The door locks at the beginning of the
cycle; The door lock symbol will appear in the display at this point. If door does not
lock, press OFF and do not self-clean; phone service.
Delaying the Start of
the Self-Clean
Note: The time of day must be correctly set for this option to work properly. See
section “Setting the Clock” in “Setting Up Your Range”.
1. Press COOKING MODE.
2. Turn knob until SELF CLEAN mode appears. Press START.
3. The default cleaning time is 4 hours. To change cleaning time, turn knob to
change number of hours. Otherwise, continue to step 4.
4. Press START.
5. Turn knob until DELAYED CLEAN mode
appears. Press START.
6. SELF CLEAN END appears in the display.
7. Turn knob to enter the time of day you want
the self-clean to end: Set hours, press time,
set minutes.
8. Press START. The display will remind you to
remove oven racks.
9. Press START. The display shows DELAYED CLEAN. The self-clean will
automatically start at the appropriate time.
Note: In the Delayed Self-Clean Mode, the door latch automatically activates at
the beginning of the cycle. The door lock symbol will appear in the display.
Note: The oven lights do not operate in the Self-Clean mode.
After Self-Cleaning 1. At the end of the programmed cleaning time, the oven will automatically turn
off. SELF CLEAN END appears in the display. Press OFF to clear.
Note: The door will not unlock until the oven reaches a safe temperature.
2. The self-clean mode may produce ash which will settle in the bottom of the
oven. If this happens, remove ash with a damp cloth before using the oven.
3. Wipe rack edges with cooking oil to allow for proper glide. Wipe off excess.
After self-cleaning, the entire oven can be safely cleaned with a soapy sponge,
rinsed and dried. If stubborn soil remains, follow the guidelines on this page.
• Always use the mildest cleaner that will remove the soil.
• Rub metal finishes in the direction of the grain.
• Use clean, soft cloths, sponges or paper towels.
• Rinse thoroughly with a minimum of water so it does not drip into door slots.
• Dry to avoid water marks.
• Do not use caustic cleaners such as Easy Off®. They may etch the surface.
The cleaners listed below indicate types of products to use and are not being
endorsed. Use all products according to package directions.
REMOVE RACKS
4: 00
SELF CLEAN
3: 00
Delayed CLEAN
SELF CLEAN
5: 45
SELF CLEAN END
SELF CLEAN