Sony NVD-U11E - Manual (Page 2)

SONY NVD-U11E ( GB,DE,FR,NL,IT,ES) 3-286-554-11 (1)
2 3
SONY NVD-U11E ( GB,DE,FR,NL,IT,ES) 3-286-554-11 (1)
Notes on use
System requirements
• OS: Windows 2000/Windows XP/Windows Vista
• DVD-ROM drive
• USB port
Before you update/add the maps on the navigation unit
• Be sure to update the navigation unit to the latest software.
Check the latest software on the following website:
http://www.navu.sony-europe.com/support
• Before connecting to your computer, install the PC connection software on your
computer.
– For Windows 2000/Windows XP users:
Insert the disc into your computer, select your language, then click “Install
ActiveSync” to install the software.
– For Windows Vista users:
Download “Windows Mobile Device Center 6.1” or later from the Microsoft support
site, if not already installed.
Notes
• If you replace the old maps on the navigation unit using this disc, you will not be able
to recover the old maps later.
• Sony cannot be responsible for any loss of personal content, such as “Address
Book” during the update process as certain aspects may not be compatible with the
updated content. Please take a few moments to write down your “Address Book” for
safekeeping, in case they are lost as a result of the update.
• For “Memory stick” details, refer to the Quick Start Guide supplied with the navigation
unit.
Connecting the navigation unit to your computer
For NV-U71T/U51 users:
1 Turn the navigation unit off.
2 Connect the navigation unit to the power supply with the
supplied AC adapter.
3 Connect the navigation unit to your computer using the
supplied USB cable and turn the navigation unit on and wait
until your computer has detected the navigation unit.
For NV-U92T/U83/U82/U72T/U53/U52 users:
1 Connect the navigation unit to your computer using the
supplied USB cable, then turn the navigation unit on.