Sega GAME SHOW - Manual (Page 15)

7 www.seuservice.com
4. ASSEMBLING AND INSTALLATION
● Perform assembly work by following the procedure herein stated. Failing to comply
with the instructions can cause electric shock hazard.
● Perform assembling as per this manual. Since this is a complex machine, erroneous
assembling can cause an electric shock, machine damage and or not functioning as
per specified performance.
● When assembling, be sure to use more then one person. Depending on the assembly
work, there are some cases in which working by one person alone can cause
personal injury or parts damage.
● Ensure that connectors are accurately connected. Incomplete connections can cause
electric shock hazard.
● Be careful not to damage the wires. Damaged wires may cause electric shock or
short circuit or present a fire risk.
● This work should be performed by the Location's Maintenance Man or Serviceman.
Performing work by non-technical personnel can cause a severe accident such as
electric shock. Failing to comply with this instruction can cause a severe accident
such as electric shock to the player during operation.
● Provide sufficient space so that assembling can be performed. Performing work in
places with narrow space or low ceiling may cause an accident and assembly work
to be difficult.
● To perform work safely and avoid serious accident such as the cabinet's falling
down, do not perform work in places where step-like grade differences, a ditch, or
slope exist.
● Handle molded parts with care. Undue weight or pressure may cause them to break
and the broken pieces may cause injury.
● To perform work safely and securely, be sure to prepare a step which is in a secure
and stable condition. Performing work without using the step can cause violent
falling down accidents.
WARNING!
CAUTION!
Tools such as a Phillips type screwdriver, wrench, socket wrench and Ratchet Handle may be required for
the assembly work.
Phillips type screwdriver