SUUNTO G3 - Manual (Page 26)

24
4. To create a 9-hole course, long press ENTER during the 9th hole, right after defin-
ing the hole distance.
NOTE: If you want to adjust the information regarding previous holes, scroll back with
STOP/BACK.
NOTE: If you want to quit the creation process for some reason, long press STOP/
BACK for more than two seconds.
5.2.2. Activating a course (Activate)
With this function you can activate a course you have created.
1. Select a suitable course in the Course menu.
2. Select Activate.
5.2.3. Editing a course (Edit)
With this function you can edit a course you have created. You can adjust all the val-
ues that you entered when you created the course.
If you adjust the stroke index of a certain hole, you must readjust the indexes of all
holes. Otherwise you may save the changes by long pressing ENTER.
5.2.4. Viewing a course (View)
With this function you can view the information concerning a course you have cre-
ated.
1. Select a suitable course in the Course menu.
2. Select View.
3. Scroll the information pages with UP and DOWN.
4. Press ENTER or STOP/CL
to stop viewing a course.