Sony DVW-250 - Manual (Page 52)

Setup menu settings
Top menu
item
<VIDEO 1>
<VIDEO 2>
<'
Submenu items (nested
submenus in angle brackets)
<SETUP LEVEL>
(DVW-250 only)
<Y/C SEP MODE>
<BLANKING>
CAMERA
STD/NSTD
EXIT
FREEZE MODE
VIDEO LEVEL
<SYSTEM PHASE>
EE DELAY
VIDEO DATA
SDI OUT
VPROC
EXIT
MASTER
LEVEL
INPUT
LEVEL
V BLANK
RM
OUTPUT
LEVEL
EXIT
LINE 12. 20
(DVW-250)
LINE 9 -22
(DVW-250P)
EXIT
LINE 12...20
(DVW-250)
LINE 9 .22
(DVW-250P)
EXIT
SYNC
PHASE
SC
PHASE
EXIT
Function
Master level
Setup level of input signal
Setup elimination in vertical
blanking interval
Setup level of output signal
Return to <VIDEO 1> menu
Toggle Y/C separation for each
line.
Return to <VIDEO 1> menu.
Toggle blanking for each input
line
Return to <VIDEO 1> menu.
Select input signal from camera
Select standard/nonstandard
composite input signal.
Return to top menu.
Select freeze mode
Set the video output level.
Adjust the phase of the sync
signal
Adjust the subcarner phase of
the sync signal
Return to <VIDEO 2> menu
Select the sync phase in E-E
mode
Set the word length for digital
video output signals
Toggle serial digital output on
and off.
When the color framing
information in a recorded signal
is not continuous, select whether
or not to suppress the picture
shift.
Return to top menu.
Setting values
0.0 % to 10.0 % in 0.5 % steps
0.0 % to 10.0 % in 0.5 % steps
MST. same value as master level
OFF: no setup elimination
ON: Carry out setup elimination
0.0 % to 10 0 % in 0 5 % steps
MST: same value as master level
—
BPF- Carry out Y/C separation.
B/W: no Y/C separation, treat as Y
signal.
—
THRU no blanking
BLNK- blank input line
—
ANA: Y/R-Y/B-Y signal
DIGI: digital signal
AUTO: Select automatically,
depend'ng on whether camera ^s
output! ng a digital signal
AUTO Select automatically, depending
on whether luminance and
chrominance signals are interleaved.
STD Always use standard signal.
NSTD Always use nonstandard signal.
If the color framing of the input video
signal is unstable, select NSTD.
—
FLD Freeze single field
FRM- Freeze frame.
-3 dB to +3 dB in 0.1 dB steps
-8 to +8 in 1 sc steps (DVW-250)
-9 to +9 in 1 sc steps (DVW-250P)
0 to 965 in 0.29 nsec steps (DVW-250)
0 to 779 in 0.29 nsec steps (DVW-250P)
—
SYNC: output in phase with playback.
VID: in phase with E-E signal
8 or 10 bits
ON: output
OFF no output
OFF: Picture will not shift by processing
the output video
ON: Picture shifts if recorded color
framing is not continuous.
—
(Continued)
Chapter 6 Setup Operations 6-3