SIGMA FD-70N - Manual (Page 11)

ISO Sensitivity/Menu Control:
• Rotate housing control over camera ISO Sensitivity control.
16
• Press button and rotate command dial to choose from ISO sensitivity
settings between 200 and 1600.
• Rotate housing control over camera Menu control
• Use Four Way Multi-Control to navigate through menus and make setting
choices.
Auto Bracketing/Advance Control:
• Rotate housing control over camera Auto Bracketing control.
17
• Press button and rotate Sub-command dial to choose between two or three
frame exposure bracketing, and amount of change between each exposure.
• Rotate housing control over camera Motor Drive Advance control.
• Press button and rotate command dial to choose between single frame or
continuous advance shooting modes, and self-timer settings.
Latching Buckles:
18
• Provides positive closure to the housing and activates the gasket seal. See
below for directions on how to close.
Optical Viewfinder Eyepiece
• Built into the back cover of the housing to assist the photographer in
viewing and focusing.
19
11