SIGMA FD-70N - Manual (Page 5)

A Variety of Uses
The Fantasea FD-70N housing is more than just an underwater camera system. It protects
the D-70 against damage from such environmental conditions as rain, snow, dust, sand,
and dirt. It is perfect protection for active outdoor sports, where these elements would
normally not allow an advanced camera like the D-70 to be used without danger of
damage. The lightweight, compact housing and handles make it easy to hold and use
while sailing, fishing, kayaking, backpacking, or just for fun at the beach or around the
pool. It will also provide a valuable tool for many commercial, industrial, and medical
applications, because it is impervious to most liquids, and sprays.
Specifications
• The FD-70N is an injection molded polycarbonate housing
• The main seal between front and back halves is a compression gasket
• The ports are sealed when mounted by a radial O-ring
• Controls use stainless steel shafts and springs
• Controls are sealed by double O-rings
• Control knobs and buttons are made of molded polycarbonate
• Latches are stainless steel
• Handles are made of molded polycarbonate
• Flash sync port is a standard five-pin Nikonos type TTL connector
• The Fantasea FD-70N has a maximum working depth rating of 200' (60m)
5