Location and function of parts – Sony 570WSPL User Manual
Page 20
Chapter 1 Overview
20
Chapter 1
Overview
Location and Function of Parts
Indications in the display window (continued)
This indicates the battery capacity and voltage as shown below.
Change menu setting for the battery you are using.
For menu settings, see “Selecting Battery Capacity Indication
Menu 206” (page 120).
Battery voltage
Indication
BP-L40/L40A/
NP-1B/BP-90A
BP-M50/M100
L60/L60A/L90/L90A
BATT E[xxxxxx]F
15.0 V or more
12.5 V or more
14.0 V or more
BATT E[xxxxx
]F
14.0 to 15.0 V
12.0 to 12.5 V
13.65 V to 14.0 V
BATT E[xxxx
p
]F
13.0 to 14.0 V
11.75 to 12.0 V
13.40 V to 13.65 V
BATT E[xxx
p
]F
12.0 to 13.0 V
11.5 to 11.75 V
12.90 V to 13.40 V
BATT E[xx
pp
]F
11.3 to 12.0 V
11.3 to 11.5 V
12.40 V to 12.90 V
BATT E[xx
pp
]F (blinking)
1)
11.25 to 11.3 V
11.25 to 11.3 V
12.25 V to 12.40 V
BATT E[x
pp
]F (blinking)
11.0 to 11.25 V
11.0 to 11.25 V
11.00 V to 12.25 V
BATT E[
ppp
]F (blinking)
11.0 V or less
11.0 V or less
11.0 V or less
1) Replace the battery pack when this indication appears.
J
Lithium backup
battery warning
Appears when the voltage of the internal lithium backup battery (CR2032) is low. If this
indication appears, replace the lithium backup battery immediately.
For further information about replacing lithium battery, see “Inserting and Replacing
the Lithium Battery” (page 37).
K
DVCAM
indication
Disappears when the cassette being played back is not for DVCAM format.
L
Cassette
memory
indication
Appears when using a cassette with cassette memory.
M
Audio mode
indications
These show audio recording/playback mode.
Fs32k: 4-channel mode (32kHz sampling frequency)
Fs48k: 2-channel mode (48kHz sampling frequency)
For further information about selecting audio recording mode, see “Selecting Audio
Recording Mode
Menu 212” (page 123).
N
Warning
indications
Include the following.
RF: Appears when the video heads are clogged, or when there is a fault in the
recording system.
SERVO: Appears when the servo lock is not functioning.
HUMID: Appears when there is condensation on the drum.
SLACK: Appears when there is a tape winding fault.
For measures against warning indications, see “Warning System” (page 142).
O
Service
indication
Appears during maintenance or VCR menu operations
(page 117). It does not appear
during normal operation.
P
Battery
capacity
indication
Indication
Description