Sony J-H1 - Manual (Page 42)

5-4 Extended Menu
Chapter 5
Setup Menu
5-12
Chapter 5 Setup Menu
Item number Item name Settings
710 INTERNAL VIDEO
SIGNAL GENERATOR Selects the test signal to be output from the VTR’s internal test signal generator.
OFF : No test signal is generated. (The VTR operates normally.)
CB: 100% color bar signal
713 VIDEO SETUP
REFERENCE LEVEL
(J-H1: 29.97 system only)
(J-H3: 29.97/23.98PD
system only) Sets the setup amount to be added to the composite output signal.
0%
7.5%
718 SETUP LEVEL (SD)
(J-H1: No item)
(J-H3: 29.97/25/23.98PD
system only) Adjusts the setup level of the SD video signal output from the SD (D CONV.)
connectors.
0 … 40H … 7FH
734 MASTER LEVEL (SD)
(J-H1: No item)
(J-H3: 29.97/25/23.98PD
system only) Adjusts the levels of the components of the SD video signal output from the SD
(D CONV.) connectors. Y, Pb, and Pr change in same value.
0 … 1000 … 1400
735 Y LEVEL (SD)
(J-H1: No item)
(J-H3: 29.97/25/23.98PD
system only) Adjusts the Y level of the SD video signal output from the SD (D CONV.)
connectors.
0 … 1000 … 1400
736 PB LEVEL (SD)
(J-H1: No item)
(J-H3: 29.97/25/23.98PD
system only) Adjusts the Pb level of the SD video signal output from the SD (D CONV.)
connectors.
0 … 1000 … 1400
737 PR LEVEL (SD)
(J-H1: No item)
(J-H3: 29.97/25/23.98PD
system only) Adjusts the Pr level of the SD video signal output from the SD (D CONV.)
connectors.
0 … 1000 … 1400
740 MASTER LEVEL (HD)
(J-H1: No item)
(J-H3: 29.97/25/23.98PD
system only) Adjusts the levels of the components of the HD video signal output from the HD
connectors. Y, Pb, and Pr change in same value.
0 … 1000 … 1400
741 Y LEVEL (HD)
(J-H1: No item)
(J-H3: 29.97/25/23.98PD
system only) Adjusts the Y level of the HD video signal output from the HD connectors.
0 … 1000 … 1400
742 PB LEVEL (HD)
(J-H1: No item)
(J-H3: 29.97/25/23.98PD
system only) Adjusts the Pb level of the HD video signal output from the HD connectors.
0 … 1000 … 1400
743 PR LEVEL (HD)
(J-H1: No item)
(J-H3: 29.97/25/23.98PD
system only) Adjusts the Pr level of the HD video signal output from the HD connectors.
0 … 1000 … 1400
745 SET UP LEVEL (HD)
(J-H1: No item)
(J-H3: 29.97/25/23.98PD
system only) Adjusts the setup level of the HD video signal output from the HD connectors.
0 … 110H … 220H
802 DIGITAL AUDIO MUTE IN
SHUTTLE MODE Sets the digital audio muting conditions during shuttle playback.
OFF : Not muted.
CUEUP: Muted during cue-up or preroll operations.
FULL: Muted in shuttle mode.
SLOW: Muted at ±0.2 times or slower.
808 INTERNAL AUDIO
SIGNAL GENERATOR Selects the operation of the internal audio test signal generator.
OFF : No operation.
1KHZ: At 1 kHz, –20 dB FS sine wave is supplied to all audio input channels.