Connecting to a power source, Using the dry batteries – Sony D-VE45 User Manual

Page 27

Advertising
background image

27

To remove the batteries

Remove the batteries as illustrated below.

When to replace the batteries

You can check the remaining power of the
batteries in the display.

Battery power is full.

r

r

Battery power is getting low.

r

r

Battery power is low.

r

Lo

* Batteries are depleted.

* Beep sounds.

When the batteries are depleted, replace both
batteries with new ones.

Notes

• The indicator sections of

roughly show the

remaining battery power. One section does not
always indicate one-fourth of the battery power.

• Depending on operating conditions, the indicator

sections of

may increase or decrease.

○○○

○○○○

You can use the following power sources:
• AC power adaptor (see “Playing a VIDEO

CD”)

• LR6 (size AA) alkaline batteries

For the battery life, see “Specifications.”

Using the dry batteries

Use only the following dry battery type for
your player:
• LR6 (size AA) alkaline batteries

Note

Be sure to remove the AC power adaptor when
using the dry batteries.

1

Open the battery compartment lid
inside your player.

2

Insert two alkaline batteries by
matching

3

to the diagram inside

the battery compartment and
close the lid until it clicks into
place.

B

Connecting to a power source

Connecting to a power source

(Continued)

Advertising