Samsung HP-P5091 - Manual (Page 3)

3
Connecting the PDP to the WIRELESS HOME AV CENTER
1 Make sure your PDP, A/V receiver and WIRELESS
HOME AV CENTER are turned off and unplugged.
2
Install the WIRELESS HOME AV RECEIVER onto
the bracket located at the top of the PDP’s rear
panel, in the direction of the arrow (as illustrated).
3 Connect the Wireless Signal cable from the WIRELESS SIGNAL INPUT Video Signal
and Audio/Control ports on the rear of the PDP to the A/V SIGNAL Port on the bottom
of the WIRELESS AV RECEIVER.
Connecting the PDP to the WIRELESS HOME AV CENTER
BN68-00766B-00Eng_1013 10/13/04 11:13 AM Page 3