Samsung HP-P5091 - Manual (Page 6)

6
Connecting a DTV Receiver
(480i, 480p)
1
2
Connect the cable or antenna to the antenna input jack on the DTV receiver.
Connect the Y, P b , P r (COMPONENT) input jacks on the WIRELESS HOME AV CENTER
to Y, P
B
, P
R
output jacks on the DTV receiver using a component cable.
● Please be sure to match the color coded input terminals and cable jacks.
● When you want to connect DTV satellite receiver or DTV cable receiver to the component jack
on the WIRELESS HOME AV CENTER, please use Lt and Rt jacks for audio input instead of
using DIGITAL AUDIO INPUT (OPTICAL).
Connecting a Digital Audio System
1
2
If your audio system has a coaxial digital audio input, connect to the “COAXIAL” output jack
on the WIRELESS HOME AV CENTER.
3 If your system has both coaxial and optical digital audio inputs, SAMSUNG recommends you
use the optical digital output on the WIRELESS HOME AV CENTER.
Do not connect both optical and coaxial cables. This may damage your audio system.
● OPTICAL: Converts the electric signal into an optical light signal, and transmits it through glass fibers.
● COAXIAL: The digital audio signal is received through a coaxial copper cable.
If your audio system has an optical digital audio input, connect to the “OPTICAL“ output jack
on the WIRELESS HOME AV CENTER. Be certain to remove the black cover from the optical
output before inserting the cable.
Component cable
Audio cable
WIRELESS HOME AV CENTER DTV Receiver
3 Connect the AUDIO L/R(COMPONENT) input jacks on the WIRELESS HOME AV CENTER to the
AUDIO output jacks on the DTV receiver using an audio cable.
WIRELESS HOME AV CENTER Digital Audio System
or
Coaxial cable
Optical cable
BN68-00766B-00Eng_1013 10/13/04 11:13 AM Page 6