Smart Technologies AIRLINER WIRELESS SLATE WS100 - Manual (Page 36)

28 Using the Slate and its Tools 99-00666-20 B0
NOTE: To select or clear the Enable Hover feature, you must first install SMART Board software
(see page 18).
1. Start the SMART Board software control panel:
– Windows operating systems: Click the SMART Board icon in your computer’s
notification area, and then select Control Panel.
– Mac operating system software: Press and hold the Control key and click the SMART
Board Tools icon in the Dock, and then select Open Control Panel.
– Linux operating systems: Select Applications > SMART Board Software > Control
Panel.
2. Click SMART Board Settings.
The SMART Board Settings dialog box appears.
3. Click your AirLiner slate in the Select a SMART product area.
A blue border appears around your AirLiner slate.
4. Select Mouse Settings from the list.
5. Select or clear the Enable Hover check box.
To select or clear the Enable Hover feature
Blue Border Around AirLiner
Slate
Mouse Settings
Select or clear this check
box.