Smart Technologies AIRLINER WIRELESS SLATE WS100 - Manual (Page 73)

99-00666-20 B0 Troubleshooting 65
The connected computer is linked to multiple displays, but you’re unable to move the
pointer from one display to another.
Complete steps 1 to 7 on page 52, selecting Entire Surface from the list in step 5.
NOTE: There are different methods for defining the arrangement of multiple displays, depending
on your operating system. For further information, refer to the instructions for your operating
system.
You installed the slate on a computer with multiple users, but the slate only works for the
primary user.
Turn off your computer, and then turn it on again. Multiple user settings take effect after you restart
the computer.
Multiple Displays
Multiple Users