Sony SPP-S9226 - Manual (Page 16)

Getting Started 16 US
Step 4: Entering the area code (continued)
4
Press Jog Button (ENTER) again.
“ENTER HOME AREA CODE.” appears on
the display.
5
Enter the three digits of your home area code
using the dialing keys.
6
Press (PROGRAM).
You hear a long confirmation beep.
Notes
• If the home area code is already entered, it appears on the display in step 3.
To enter a different home area code, see “To change the home area code”
below.
• Do not allow more than 20 seconds to elapse during the operation procedure.
• If the area code has not been entered, calling back from the Caller ID list and
storing the Caller ID data into the Phone Directory cannot be performed.
• If the home area code is not correctly entered, “SEND TO CORDLESS
HANDSET FAILED.” will appear on the display and five short error beeps
will be heard after (PROGRAM) is pressed in step 6. Move the cordless
handset closer to the base phone, and then start over the procedure.
Tips
• When you select “[GO BACK]”, you can return to the previous set display by
pressing Jog Button (ENTER).
• You may press Jog Button (ENTER) instead of (PROGRAM) in step 6.
• To check the current home area code, perform steps 1 to 3. The home area
code appears on the display for about 20 seconds.
To change the home area code
1
Perform steps 1 to 4 on pages 15 to 16.
The current home area code appears on the display.
2
Press (ERASE) to erase the current home area code.
3
Enter a new home area code using the dialing keys.
4
Press (PROGRAM).
You hear a long confirmation beep.
To erase the home area code
You can erase the home area code. Perform steps 1 and 2 above, then
press (PROGRAM).
The home area code will be erased, and you hear a long confirmation
beep.
ENTER HOME
AREA CODE.
_