Calibrating the appropriate settings, Automatically, Auto calibration) – Sony HT-DDW5500 User Manual

Page 31: Calibrating the appropriate settings automatically, Before you perform auto calibration

Advertising
background image

31

GB

Ge
tting Star

te

d

7: Calibrating the
appropriate settings
automatically

(AUTO CALIBRATION)

The DCAC (Digital Cinema Auto Calibration)
function allows you to perform automatic
calibration such as:
• Checking the connection between each

speaker and the receiver.

• Adjusting the speaker level.
• Measuring the distance of each speaker from

your seating position automatically.

The DCAC is designed to obtain proper sound
balance in your room. However, you can
adjust the speaker levels and balance manually
according to your preference. For details, see
“8: Adjusting the speaker levels and balance
(TEST TONE)” (page 34).

Before you perform Auto Calibration, install
and connect the speakers (page 14, 16).
• The AUTO CAL MIC jack is used for the

supplied optimizer microphone only. Do not
connect other microphones to this jack.
Doing so may damage the receiver and the
microphone.

• During calibration, the sound that comes out

of the speakers is very loud. The volume of
the sound cannot be adjusted. Pay attention
to the presence of children or to the effect on
your neighborhood.

• Perform Auto Calibration in a quiet

environment to avoid the effect of noise and
to get a more accurate measurement.

• If there are any obstacles in the path between

the optimizer microphone and the speakers,
the calibration cannot be performed
correctly. Remove any obstacles from the
measurement area to avoid measurement
error.

Notes

• The Auto Calibration function does not work when

headphones are connected.

• If the muting function has been activated before

you perform Auto Calibration, the muting function
will be set to off automatically.

1

Connect the supplied optimizer
microphone to the AUTO CAL
MIC jack.

2

Set up the optimizer
microphone.

Place the optimizer microphone at your
seating position. Use a stool or tripod so
that the optimizer microphone remains at
the same height as your ears.

Tip

When you face the speaker towards the optimizer
microphone, you will get a more accurate
measurement.

Before you perform Auto
Calibration

MULTI STEREO

GAME

NIGHT MODE

PHONES

MOVIE

A.F.D.

AUTO CAL MIC

VIDEO

L AUDIO R

VIDEO 2 IN

MASTER VOLUME

INPUT SELECTOR

MUSIC

?/1

?/1

Optimizer microphone

Advertising