Sony HT-DDW5500 - Manual (Page 41)

41 GB
Ampl
ifier O
p
e
ration
s
a)
For details, refer to the page in the parentheses.
b)
This function does not work for signals with a sampling frequency of more than 48 kHz.
c)
If you adjust the tone during DTS 96/24 signal reception, the signal will be output only at 48 kHz.
d)
This parameter is not available for models of area code EA.
Menu
[Display]
Parameters
[Display]
Settings Initial
setting
AUDIO
[5-AUDIO]
(page 45)
Digital broadcast language
selection
a)
[DUAL]
DUAL M/S, DUAL M, DUAL S,
DUAL M+S
DUAL M
Synchronizes audio with video
output
a)
[A.V. SYNC.]
A.V.SYNC. N, A.V.SYNC. Y A.V.SYNC. N
Switching the audio input
mode
a)
[IN MODE]
For details, see “Switching between
digital and analog audio (INPUT
MODE)” (page 59).
Night mode
a)
[NIGHT.MODE]
NIGHT OFF, NIGHT ON NIGHT OFF
VIDEO
[6-VIDEO]
(page 46)
DIGITAL MEDIA PORT
video assign
a)
[DMPORT V.]
–NONE, –VIDEO 1, –VIDEO 2,
–DVD, –SAT
–NONE
SYSTEM
[7-SYSTEM]
(page 47)
Front speaker distance
a)
[FRT DIST.]
DIST. 1.0 m to DIST. 7.0 m
(0.1 m step)
DIST. 3.0 m
Center speaker distance
a)
[CNT DIST.]
DIST. 1.0 m to DIST. 7.0 m
(0.1 m step)
DIST. 3.0 m
Surround left speaker
distance
a)
[SL DIST.]
DIST. 1.0 m to DIST. 7.0 m
(0.1 m step)
DIST. 3.0 m
Surround right speaker
distance
a)
[SR DIST.]
DIST. 1.0 m to DIST. 7.0 m
(0.1 m step)
DIST. 3.0 m
Surround back speaker
distance
a)
[SB DIST.]
DIST. 1.0 m to DIST. 7.0 m
(0.1 m step)
DIST. 3.0 m
Subwoofer phase polarity
a)
[SW PHASE]
NORMAL, REVERSE NORMAL
Surround speaker position
a)
[SUR POS.]
BEHD/HI, BEHD/LO, SIDE/HI,
SIDE/LO SIDE/LO
Naming inputs
a)
[NAME IN]
For details, see “Naming inputs”
(page 36).
A. CAL
[8-A. CAL]
(page 49)
Auto Calibration
a)
[AUTO CAL]
A.CAL NO, A.CAL YES A.CAL NO