Samsung CLX-3175FN User Manual
Pull the waste toner container out of the machine using its handle.
Pull the imaging unit out of the machine using the groove on the front of
the imaging unit.
With a dry lint-free cloth, wipe away any dust and spilled toner from the
toner cartridges area and their cavities.
Holding the groove on the front of the imaging unit, push imaging unit in
to the machine.
Insert the waste toner container into position and then push it to make
sure that it is firmly seated in place.
Slide four toner cartridge back into the machine.
Reinstall all the compartments into the machine, and close the front
Plug in the power cord and turn the machine on
Do not touch the green surface, the imaging unit with your hands
or any other material.
Be careful not to scratch the surface of the imaging unit
If you leave the front cover open for more than a few minutes, the
imaging unit can be exposed to light. This will cause damage to
the imaging unit. Close the front cover should the installation need
to be halted for any reason.
If toner gets on your clothing, wipe it off with a dry cloth and wash
it in cold water. Hot water sets toner into fabric.
If your machine or its surrounding is contaminated with toner, we
recommend you to use a cloth or tissue dampened with water to
clean it. If you use a vacum cleaner, toner blows into the air then
might be harmful to you.
After cleaning, let the machine to dry completely.
If the front cover is not completely closed, the machine will not