In the paper exit area, In the paper exit area" on – Samsung CLX-3175FN User Manual
Open the inner cover.
Carefully take the jammed paper out of the machine.
Close the inner cover.
Lowering down the scan unit gently and slowly until it is completely
closed. Make sure that it is securely latched.
Be careful not to pinch your fingers!
In the paper exit area
Open and close the front cover. The jammed paper is automatically
ejected from the machine.
Gently pull the paper out of the output tray.
If you do not see the jammed paper or if there is any resistance when
you pull, stop and go to the next step.
Open the rear cover.
If you see the jammed paper, pull it straight up. Skip to step 8.
If you still do not see the paper, go to the next step.
Pull up the fuser lever.
Do not touch the fuser inside the inner cover. It is hot and could
cause burns! The fuser's operating temperature is 180°C (356°F).
Take care when removing paper from the machine.
If the scan unit is not completely closed, the machine will not