Bulletin 21 – State Industries GSX User Manual

Page 31

Advertising
background image

31

BULLETIN 21

DISCOLORED WATER

SYMPTOMS

Rusty, brown, black, or yellow water appearing in the hot water.

CAUSES

Complaints of discolored water are commonly blamed on water heaters and storage
tanks, but in fact, it is a rare occurrence for today’s high quality glass lined tanks to
have a lining failure signifi cant enough to allow water to contact enough bare metal to
discolor the contents of even a small tank.

The most common cause of “rusty” water is a non-toxic iron reducing bacteria,
scientifi cally termed Crenothrix, Leptothrix, and Gallionella. Iron bacteria is commonly
found in soil, water wells, water treatment plants and water distribution piping systems
where soluble iron exceeds 0.2 ppm, higher levels make conditions even more
favorable. Soluble iron in the water provides food for the bacteria. Rusty discolored
water is the end result of the bacteria feeding process. Water heaters and storage
tanks usually require new anode rods as presence of iron bacteria contributes to
premature anode failure.

The requirements for the bacteria to thrive are:

Elevated levels of iron and manganese in the water

Water with little or no dissolved oxygen

Temperatures below 138°F

Items that can increase the potential for this bacteria are:
• Water

softeners

• Well

water

Long periods of no water movement

TREATMENT

The simplest treatment available is shock-chlorination of the system. This is a
surface treatment, and often requires repeated trials in heavily infected systems. The
chlorination of a system requires that you follow each step explicitly to avoid an un-
treated portion of the piping system from reinfecting another part. See Bulletin 23 for
the chlorination procedure.

NOTES

Since rusty water is caused by a bacteria presence and is not caused by the
water heater, any treatment would not be considered warranty related.

Advertising
This manual is related to the following products:

GPX