Sanyo VPC-J1 - Manual (Page 104)

COMPRESSION RATE SETTING
Use the procedure below to set the compression rate. Even if the same
resolution is used, you can change the compression setting to decrease the
image data size so that you can capture more images, or increase the image
data size for no loss in image quality.
1
Display an EXPERT Mode Shooting
Setting Screen (see page 94).
2
Select the desired compression rate
from the compression menu, and
press the SET button.
b : Stores the data with a low
compression (high quality).
a : Stores the data with an extremely
low compression (super high
quality).
c : Stores the data with normal
compression (normal quality).
<Example: Still image shooting
mode>
12
COMPRESSION
FINE
SX711/EX, GX, U (VPC-J1 GB) Tue. Feb., 25/2003
101
English