Solo USA MS 270 - Manual (Page 46)

45 MS 270, MS 270 C, MS 280, MS 280 C
English / USA
: Locate the filter (3) in position (see
arrows).
: Fit the carburetor box cover.
Exhaust emissions are controlled by the
design of the fundamental engine
parameters and components (e.g.
carburation, ignition, timing and valve or
port timing) without the addition of any
major hardware. Your chainsaw is equipped with one of
the following carburetors:
– Intelligent Engine Management –
Carburetor without high speed
screw (H). Full load range and
maximum RPM are controlled
electronically.
– Carburetor with high speed
screw (H)
3
146BA011 KN
Motor Management Adjusting the Carburetor
L
LA
L
146BA014 KN
H