Solo USA MS 270 - Manual (Page 58)

57 MS 270, MS 270 C, MS 280, MS 280 C
English / USA
1) STIHL recommends that this work
be done by a STIHL servicing dealer
2) see "Chain brake"
Maintenance Chart
Please note that the following maintenance intervals apply for normal
operating conditions only. If your daily working time is longer than normal or
cutting conditions are difficult (very dusty work area, resin-rich wood,
tropical wood etc.), shorten the specified intervals accordingly. If you only
use the saw occasionally, extend the intervals accordingly.
bef
ore
st
art
ing work
af
ter f
inishing
w
ork or
d
a
ily
af
te
r each
ref
uelin
g st
op
we
e
kl
y
m
ont
hly
e
ver
y 12
m
on
ths
if pro
b
lem
if dama
ged
as re
quire
d
Complete machine
Visual inspection (condition, leaks) X X
Clean X
Throttle trigger, trigger interlock, Master
Control
Check operation X X
Chain brake
Check operation X X
Have checked by servicing dealer 1)2) X
Pickup body/filter in fuel tank
Check X
Clean, replace filter element X X
Replace pickup body X X X
Fuel tank Clean X
Chain oil tank Clean X
Chain lubrication Check X
Saw chain
Inspect, also check sharpness X X
Check chain tension X X
Sharpen X
Guide bar
Check (wear, damage) X
Clean and turn over X
Deburr X
Replace X X
Chain sprocket Check X
Air filter
Clean X X
Replace X
AV elements (rubber buffers, springs)
Inspect X X
Have replaced by servicing dealer 1) X
Cooling inlets Clean X
Cylinder fins Clean X X