Solo USA MS 270 - Manual (Page 64)

63 MS 270, MS 270 C, MS 280, MS 280 C
English / USA
Please enter your saw model, serial
number as well as the part numbers of
the guide bar and saw chain in the
spaces provided. This will make
re-ordering simpler.
The guide bar and saw chain are subject
to normal wear and tear.
When purchasing these parts, always
quote the saw model, the part numbers
and names of the parts.
Model
Serial number
Guide bar part number
Chain part number
For recommended STIHL reduced
kickback cutting attachments
see section “Specifications“
of this Owner’s Manual.
Users of this unit should carry out only
the maintenance operations described
in this manual. Other repair work may be
performed only by authorized STIHL
service shops.
Warranty claims following repairs can be
accepted only if the repair has been
performed by an authorized STIHL
servicing dealer using original STIHL
replacement parts.
Original STlHL parts can be identified by
the STlHL part number, the
STIHl
logo and, in some cases, by the STlHL
parts symbol
(. This symbol may
appear alone on small parts.
Ordering Spare Parts Maintenance and Repairs