Rf channel, Rf retries, Rf channel -13 rf retries -13 – Symbol Technologies P470 User Manual
Page 83: 13, c
5-13
Parameter Menus
RF Channel
Selects the RF channel used for radio transmissions and reception. The channel ranges
are nation dependent (see
for a list of Channel Availability by
Country). To enter a range, scan the bar code below followed by 2 digits from the numeric
bar code section (starting on page
) to set the desired channel. If the channel is not
legal for your country, an error beep will be heard instead of a successful warble. It is
recommended that each scanner/cradle pair be set to a different channel than neighboring
scanner/cradle pairs.
RF Channel
RF Retries
On a transmission, the radio will try to send the data a certain number of times prior to giving
up if the receiving cradle is not responding. The following parameter allows the user to
select how many retries should be tried. For additional information, see
3 RETRIES
*4 RETRIES